Introduction:
　　 Polyurethane is mainly made of satu polyester with isocyanate as curing agent

Feature:
　　 Good mechanical performance smooth film Excellent weatherability

Uses:
　　 Structural steel,wall and bridge etc

Series of Product:
　　 Standard weatherability and super high weatherability products
　　 It could be made to various luster and color
　　 It could be made to various kinds of art texture products,such as flat,lanose grain,webbing,wrinkle,sandy,hammer tone etc

Physical Property:
　　 Density: 1.1-1.8 g/cm3,standard curing and lower temperature curing
　　 Granularity distribution:Varies with different purpose.Average particle size is
　　 28-38um,10um-84um, powder>90%　Volatility<2%

Coating Film Property:

Properties	Test Method	Value
Pencil Hardness	GB/T 6739-1996	≥ H
Impact strength test	GB/T 1732-93	50 KG cm
Erichsen cupping	GB 9753-88	＞6mm
Adhesion	GB/T 9286-1998	0grade
Bend test	GB 6742-86	3mm
Salt spray test	GB/T 1771-91	100h no change
Humid heat test	GB/T 1740-79	1000h ≤ 1 grade
Accelerated light aging test	ASTM G154	QUV 0.78m/m2 340nm 500h

Apply Condition:
　　 Pretreatment:Phosphated,Chromated
　　 Coating method:Electrostatic-fluidized bed coating;Corona electrostatic spray coating;
　　 Tribo-electrification coating
　　 Curing condition: 200°C/10min 180°C/15min　150°C/25min

Packing:
　　 Double pvc bag,net weight is 20KG each carton

Storage:
　　 Dry room with good ventilation, Temperture is lowder than 30°C,avoid direct
　　 sunlight.There are 12 months to maintain under this condition.Expired prod
　　 ucts still cannot be used unless testing results meet the utilization standards

Health and Safety:
　　 There are no hazardous ingredients in all the raw materials of powder coatings and no hazardous gas will be released while using.However,the inhalation of dusts should be avoilded.An operator should wear an anti-dust mask and try best to avoid long-term contact with the powder coating.Those coaings sticked on the skin should be washed by soap.